水泥窑用耐火材料(Refractories for Cement Kiln)

   水泥窑用耐火材料品种有碳化硅,高铝复合砖HMS高耐磨砖、抗剥落高铝砖、陶粒砖、系列磷酸盐砖、系列耐碱砖、耐碱浇注料、钢纤维增强耐火浇注料、刚玉质浇注料、CB系列隔热砖。
   上述产品广泛应用于大、中型水泥回转窑窑口,冷却带、分解带、过渡带、预热带、窑门罩、预热器、冷却机、分解炉、三次风管等部位。可根据使用条件选用相适应的耐火材料。
   产品已用于宁国水泥厂、冀东水泥厂、柳州水泥厂、河北太行水泥有限公司、顺昌水泥厂、哈尔滨水泥厂、中国水泥厂、京阳水泥厂、大连—小野田水泥有限公司,江南—小野田水泥有限公司、烟台三菱水泥有限公司、江西亚东水泥有限公司等国内众多水泥企业。
    Product range:SiC-Alumima composite brick,HMS abrasion resistant brick,Anti-spalling alumina brick,Ceramsite brick,Phosphate brick,Series Alkali-resistant brick,Alkali-resistant castable with steel fibre,corundum castable,CB series insulating brick,which are largely applide to rings,cooling zone,calciation zone,transition zone,preheating zone,kiln door cover,preheator,cooler,calcining furnace,recoup duct and ete. Of large and medium sized cement kilns.It is easy to select the product accordingly.
  Our products have been widely applied by Ningguo Cement Plant,Jidong Cement Plant,Liuzhou Cement Plant,Hebei Taihang Cement Company Ltd., Shunchang Cement Plant,Harbin Cement Plant,China Cement Plant,Jingyang Cement Plant,Dalian-Onoda Cement Company Ltd.,Jiangnan-Onoda Cement Company Ltd.,Yantai Mitsubishi Cement Co.Ltd.,Jianxi Ya Dong Cement Co.Ltd.,and etc.

高铝碳化硅系列 高铝系列  轻质系列  磷酸盐系列  耐碱系列  不定形系列

高铝碳化硅系列

 返回

返回

牌号
Brand

材质
Aggregate

 理化性能 Physical & Chemical Properties

化学成份% Chemical Composition

体积密度 (g.cm3) Bulk
Density

常温耐压 (MPa)
Cold Crushing
Strength

耐火度
 
() Refractoriness

荷重软化点 T06() Refractoriness Under Load

热震稳定性 ()1100

Al2O3

SiC

YN-SA80

碳化硅复合铝复合砖
SiC.High alumina
Composite
brick

碳化硅端
SiC end

标准值 Standard value

 

75

 

≥60

   

15

典型值 Typical value

 

76.5

 

96.3

   

20

高铝端 Alumina end

标准值 Standard value

60

   

30

1770

   

典型值 Typical value

71.9

   

53

1790

   

YN-HMS

       高耐磨砖
High abrasion resistant brick

标准值 Standard value

48

 

2.50

65

 

1530

10

典型值 Typical value

66.27

 

2.59

95.50

 

1590

13

HMS高耐用磨砖适用于水泥回转窑的窑口,冷却带、过渡带、篦冷机侧墙下部和特别容易磨损的部位。
HMS High abrasion resistant brick are applied to end rings,cooling zone,trzansiton
zone,lower lining of side wall of grate cooler in rotarg kiln ,and other easy to be abraded.